Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Mori, Koji*; Neyama, Atsushi*; Nakagawa, Koichi*
JNC TJ8400 2000-064, 175 Pages, 2000/03
JNC-TJ8400-2000-064.pdf:5.23MB
In this study, the following tasks have been performed in order to evaluate the stability of earthquake resistance for the engineered barrier system(EBS) of High Level Waste (HLW) geological isolation system. (1)validation studies for the liquefaction model. The function of single-phase analysis without interaction between soil and pore water in three-dimensional effective stress analysis code, which had been developed in this study, have been verified using by actual vibration test data. This fiscal year, some validation studies for the function of liquefaction analysis was conducted usig by actual measured data through the laboratory liquefaction test. (2)Supplemental Studies for JNC Second Progress Report. Through the JNC second progress report, it was considered that the stability of earthquake resistance of the engineered barrier system would be maintained under the major seismic event. At the same time we have recognized that several model parameters for joint-crack element, which takes into account for the response behavior of material discontinuous surface such as between overpack and buffer material, will become important in the response behavior of the whole EBS. This year, we have studied about several topics, which arise from technical discussion on JNC second progress report and we have discussed about total seismic stability of EBS. (3)Supplemental Studies for joint study with NRIDP. At this fiscal year, the joint study with National Research Institute for Disaster Prevention (NRIDP) will be final stage. UP to this day, incremental validation studies had been continued using by mesuared data obtained from vibration test. In this final stage, validation analysis has been conducted again using by current version new analysis code and maintained the validation data which will be contribute to the joint study mentioned above.
Takachi, Kazuhiko; Taniguchi, Wataru
JNC TN8400 99-042, 68 Pages, 1999/11
The buffer material is expected to maintain its low water permeability, self-sealing properties, radionuclides adsorption and retardation properties, thermal conductivity, chemical buffering properties, overpack supporting properties, stress buffering properties, etc. over a long period of time. Natural clay is mentioned as a material that can relatively satisfy above. Among the kinds of natural clay, bentonite when compacted is superior because (1)it has exceptionally low water permeability and properties to control the movement of water in buffer, (2)it fills void spaces in the buffer and fractures in the host rock as it swells upon water uptake, (3)it has the ability to exchange cations and to adsorb cationic radioelements. In order to confirm these functions for the purpose of safety assessment, it is necessary to evaluate buffer properties through laboratory tests and engineering-scale tests, and to make assessments based on the ranges in the data obtained. This report describes the procedures, test conditions, results and examinations on the buffer material of dynamic triaxial tests, measurement of elastic wave velocity and liquefaction tests that aim at getting hold of dynamic mechanical properties. MWe can get hold of dependency on the shearing strain of the shearing modulus and hysteresis damping constant, the application for the mechanical model etc. by dynamic triaxial tests, the acceptability of maximum shearing modulus obtained from dynamic triaxial tests etc. by measurement of elastic wave velocity and dynamic strength caused by cyclic stress etc. by liquefaction tests.